In #615, they were accidentally moved to /usr/lib/tuned/profiles/
where all profiles were migrated.
This also changes the location of `functions` file within
the repository, separating it from the profiles themselves.
Resolves#642.
This attribute accepts a range from 0 through 4 where larger values
will also have larger panel power savings.
Using this has a trade off for color accuracy, and it is only applied
when the system is currently operating on battery.
Intentionally the plugin will check what values are already programmed
to the sysfs file to avoid unnecessary writes. Writing the sysfs file
will cause a modeset which isn't necessary if writing the same value twice.
The default values are applied to the profiles that are used in
power-profiles-daemon compatbility. They also match the values used in
that software.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
power-profiles-daemon has the ability to detect battery change events
using upower and to apply different tuned settings based upon whether
plugged into power or not.
In PPD this is used specifically to set the energy performance preference
differently in the 'balanced' profile, but there is no reason that this
concept can't actually apply to all profiles.
Add support for detecting battery change events and apply a profile
specified in ppd.conf for battery in the different PPD states.
This change does not attempt to _wifi_set_power_level()
unless /proc/net/wireless exists.
Other changes: fix a typo.
Signed-off-by: Jiri Mencak <jmencak@users.noreply.github.com>
Resolves: RHEL-16966
At this point, the plugin supports setting a single sysfs attribute,
platform_profile.
The 3 basic ACPI platform profiles are low-power, balanced, and
performance. These are mapped to the generic powersave,
balanced, and *-performance TuneD profiles.
Just explain what isolated_cores= is for and recommend to only have one
isolated_cores= line to avoid wrong system configuration.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When ksm or ksmtuned services do not exist, return 0 so that we do not
generate ERRORs in TuneD logs.
Resolves: OCPBUGS-19656
Signed-off-by: Jiri Mencak <jmencak@users.noreply.github.com>
The rcu_normal_after_boot=1 kernel parameter (which is enabled by
default on CONFIG_PREEMPT_RT kernels) avoids the use of IPIs
to expedite the runtime of synchronize_rcu_expedited() callers.
Enable this in tuned to avoid such IPIs on !CONFIG_PREEMPT_RT kernels
as well.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The ktimer_lockless_check interface was removed from Red Hat kernels.
Drop the tuned configuration as well.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The interruptions avoided by the rtentsk logic:
"Add plugin to open a socket with SOF_TIMESTAMPING_OPT_TX_SWHW.
This is for avoiding interruptions due to static key IPIs due
to opening socket with timestamping enabled (by opening a
socket ourselves the static key is kept enabled)."
Are also desired on systems that use cpu-partitioning.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit 49cc817871
("realtime: Set tsc as 'reliable'") reads:
"We already disable the clocksource watchdog, it's there to double-check
whether clock results are coherent between reads. But a new reliability
test was introduced in recent kernels[1], tracking tsc drift between
CPUs[2]. It works by programming timers on all CPUs, including isolated
ones, and checks whether the tsc was adjusted in between runs. This
introduces unwarranted latency on real time systems. So let's promote
tsc to 'reliable', which disables both checks."
The timer is also undesired interruption to systems that use cpu-partitioning.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The following sysctl settings are the same between cpu-partitioning and
realtime profiles:
kernel.hung_task_timeout_secs = 600
kernel.nmi_watchdog = 0
vm.stat_interval = 10
kernel.timer_migration = 0
Unify them in the network-latency profile, parent of both profiles.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With openshift/machine-config-operator#3676 we
removed globally setting ip forwarding in MCO. We should not be setting
it in the default profile for OpenShift. We now set it on a per
interface basis as needed. However, by setting proc/sys/net/ipv4/forward
rather than (forwarding) it will reset all the values:
"This variable is special, its change resets all configuration
parameters to their default state (RFC1122 for hosts, RFC1812
for routers)"
We suspect this causes upgrade to fail. NTO sets this to 1, which then
resets all the per interface config that OVNK wrote. Then during upgrade
when there is a tuned profile change, the config change is rolled back
so forward is 0, and now there is no connectivity to kapi and upgrade
fails.
Signed-off-by: Tim Rozet <trozet@redhat.com>
The new profile sets the intel_acpi driver to passive mode to
be able to set the standard acpi governors (ondemand/userspace)
and provides more flexibility on the C-states, as it is exposed
as a new variable.
Signed-off-by: Christophe Fontaine <cfontain@redhat.com>
The PREEMPT_RT upstream tree [1] is reintroducing a per-CPU kthread for
handling timer expiry named ktimers/${cpu}, and RHEL-RT is following this
approach [2].
The recommended priority tuning for that kthread is to simply match that of
ksoftirqd, which is what is implemented here.
Note that ktimersoftd is the predecessor of ktimers, and isn't present on
RT kernels newer than v5.0.19-rt11 / RHEL-RT 7.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=2122220
Resolves: rhbz#2122220
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
In the old kernels, vm.hugepages_treat_as_movable tunable was aimed at
reducing memory fragmentation. Things have changed since then and this
tunable is no longer present in recent kernels:
https://lore.kernel.org/lkml/20171003072619.8654-1-mhocko@kernel.org/t/
Its presence in the hpc-compute profile causes TuneD to log errors.
Remove it.
Signed-off-by: Jiri Mencak <jmencak@users.noreply.github.com>
The kernel tunable fs.aio-max-nr specifies the maximum number of events
specified on the io_setup() call for all currently active aio contexts.
On large systems this causes issues with the io_setup() call failing
with EAGAIN. Libvirt already increases this setting to 1048576:
96e99e4948/src/remote/libvirtd.sysctl
The only potential drawback of a larger limit is that a malicious users
could issue parallel io_setup() requests to cause the kernel to set
aside memory.
Signed-off-by: Jiri Mencak <jmencak@users.noreply.github.com>
According to testing done by the kernel QE and performance teams,
the sched_* tunables should be dropped in several profiles.
The openshift-control-plane profile is based on other profiles
which have already dropped these tunables (network-latency,
throughput-performance).
The calc_isolated_cores function expands to the list of cores to
isolate. It accepts optional argument which specifies how many cores
from each socket reserve for housekeeping. If not specified, one core
from each socket is reserved for housekeeping.
Example:
Machine with 2 sockets, each 4 cores, using the following user variable
configuration file, e.g. /etc/tuned/realtime-variables.conf:
isolated_cores=${f:calc_isolated_cores:2}
It will expand to:
isolated_cores=2, 3, 6, 7
I.e. cores 0, 1 and 4, 5 will be used for housekeeping.
Also updated the TuneD profiles to use this builtin function for
isolated_cores preset.
Resolves: rhbz#2093847
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
AWS Nitro instances need special tuning for NVMe devices:
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/nvme-ebs-volumes.html#timeout-nvme-ebs-volumes
[sysfs]
/sys/module/nvme_core/parameters/io_timeout=4294967295
/sys/module/nvme_core/parameters/max_retries=10
This tuning should probably be moved to Cloud Provider-specific profiles
once the functionality is implemented.
Signed-off-by: Jiri Mencak <jmencak@users.noreply.github.com>
We already disable the clocksource watchdog, it's there to double-check
whether clock results are coherent between reads. But a new reliability
test was introduced in recent kernels[1], tracking tsc drift between
CPUs[2]. It works by programming timers on all CPUs, including isolated
ones, and checks whether the tsc was adjusted in between runs. This
introduces unwarranted latency on real time systems. So let's promote
tsc to 'reliable', which disables both checks.
There shouldn't be any impact on old nor new setups. First, this test
didn't exist in the past, so any eventual drift was left uncorrected.
Second, most telco and HPC use-cases will make heavy use of tsc in
user-space, and its reliability is already assumed in the system's
design.
[1] c7719e793478 x86/tsc: Add a timer to make sure TSC_adjust is always
checked
[2] Generally caused by rogue BIOSes adjusting the tsc on a CPU and not
doing so on the rest
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
