Spindown disc profile - set disc to minimum spins.

Writen-by: Daniel Mach
Rewrite-into-profile: Marcela Mašláňová

tune-profiles/spindown-disk/README

@@ -0,0 +1,14 @@
+Possible problems:
+The script is remounting your ext3 fs if you have
+it as noatime. Also configuration of rsyslog is
+changed to not sync. hdparm is setting disc to
+minimal spins but without use of tuned daemon.
+Bluetooth will be switch off.
+Wifi will be switch into power safe mode.
+Usecase:
+Safe extra energy on your laptop or home server
+which wake-up only when you ssh to it. On server
+could be hdparm and sysctl values problematic for 
+some type of discs. Laptops should be probably ok
+with these numbers.
+

tune-profiles/spindown-disk/ktune.sh

@@ -0,0 +1,143 @@
+#!/bin/sh
+# Author of original script: Daniel Mach
+# Rewrite into profiles by: Marcela Mašláňová
+
+ALPM="medium_power"
+
+# Set ALPM for all host adapters that support it
+set_alpm() {
+	for x in /sys/bus/scsi/devices/host*/scsi_host/host*/; do
+		hotplug="0"
+		if [ -e $x/sata_hotplug ]; then
+			hotplug="$(cat $x/sata_hotplug)"
+		fi
+		if [ "$hotplug" == "0" -a -e $x/link_power_management_policy ]; then
+			echo $1 > $x/link_power_management_policy
+		fi
+	done
+}
+
+remount() {
+	OPTS=$1
+
+    mount | grep 'type ext3 (' | while read LINE; do
+		DEV=$(echo $LINE | sed 's@^\(.*\) on .* type .*$@\1@')
+		MNT=$(echo $LINE | sed 's@^.* on \(.*\) type .*$@\1@')
+		mount -o remount,$1 $DEV $MNT
+    done
+}
+
+
+hdd_apm() {
+	APM=$1
+
+	for DEV in /dev/[sh]d[a-z]; do
+		hdparm -B $APM $DEV >/dev/null 2>&1
+	done
+}
+
+
+hdd_spindown() {
+	SPINDOWN=$1
+
+	for DEV in /dev/[sh]d[a-z]; do
+		hdparm -S $SPINDOWN $DEV >/dev/null 2>&1
+	done
+}
+
+
+wireless_powersave() {
+	POWER=$1
+
+	IFACES=$(cat /proc/net/wireless | grep -v '|' | sed 's@^ *\([^:]*\):.*@\1@')
+	for IFACE in $IFACES; do
+		iwpriv $IFACE set_power $POWER
+	done
+}
+
+dont_sync_logs() {
+	cp -p /etc/rsyslog.conf /etc/rsyslog.conf.bckp
+	sed 's/ \/var\/log/-\/var\/log/' /etc/rsyslog.conf.bckp > /etc/rsyslog.conf
+}
+
+revert_logs() {
+	mv /etc/rsyslog.conf.bckp /etc/rsyslog.conf
+}
+
+start() {
+# redirect cron to tty8 isn't probably needed anymore
+
+	set_alpm ${ALPM}
+	# Enables USB autosuspend for all devices
+	for i in /sys/bus/usb/devices/*/power/autosuspend; do echo 1 > $i; done
+	# Disable HAL polling of CDROMS
+	for i in /dev/scd*; do hal-disable-polling --device $i; done
+	hciconfig hci0 down; modprobe -r hci_usb
+	dont_sync_logs
+	wireless_powersave 1
+	hdd_spindown 6
+	hdd_apm 128
+	remount commit=600,noatime
+	find /etc/ >/dev/null 2>&1
+	sync
+	return 0
+}
+
+# Disable ALPM for all host adapters that support it
+stop() {
+	set_alpm "max_power"
+	modprobe hci_usb; hciconfig hci0 up
+	wireless_powersave 0
+	revert_logs
+	hdd_spindown 0
+	hdd_apm 255
+	remount commit=5
+	return 0
+}
+
+# Reload it, just start once more
+reload() {
+	start
+}
+
+# Status
+status() {
+	return 0
+}
+
+
+case "$1" in
+    start)
+        [ -f "$VAR_SUBSYS_KTUNE" ] && exit 0
+        start
+        RETVAL=$?
+        ;;
+    stop)
+        [ -f "$VAR_SUBSYS_KTUNE" ] || exit 0
+        stop
+        RETVAL=$?
+        ;;
+    reload)
+        [ -f "$VAR_SUBSYS_KTUNE" ] && reload
+        RETVAL=$?
+        ;;
+    restart|force-reload)
+        [ -f "$VAR_SUBSYS_KTUNE" ] && stop
+        start
+        RETVAL=$?
+        ;;
+    condrestart|try-restart)
+        [ -f "$VAR_SUBSYS_KTUNE" ] || exit 0
+        stop
+        start
+        RETVAL=$?
+        ;;
+    status)
+        status
+        RETVAL=$?
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|condrestart|status}"
+        RETVAL=2
+        ;;
+esac

tune-profiles/spindown-disk/ktune.sysconfig

@@ -0,0 +1,17 @@
+# ktune service configuration
+
+# This is the ktune sysctl file.  You can comment this out to prevent ktune
+# from applying its sysctl settings.
+SYSCTL="/etc/sysctl.ktune"
+
+# Use *.conf files in the ktune configuration directory /etc/ktune.d.
+#   Value: yes|no,  default: yes
+# It is useful if you want to load settings from additional files. Set this to
+# no if you to prevent ktune from using these additional files.
+USE_KTUNE_D="yes"
+
+# This is the custom sysctl configuration file.  Any settings in this file will
+# be applied after the ktune settings, overriding them.  Comment this out to
+# use only the ktune settings.
+SYSCTL_POST="/etc/sysctl.conf"
+

tune-profiles/spindown-disk/sysctl.ktune

@@ -0,0 +1,7 @@
+# ktune sysctl settings
+
+vm.dirty_writeback_centisecs=6000
+vm.dirty_expire_centisecs=9000
+vm.dirty_ratio=60
+vm.laptop_mode=5
+vm.swappiness=30

tune-profiles/spindown-disk/tuned.conf

@@ -0,0 +1,57 @@
+#
+# tuned configuration main service
+#
+
+[main]
+# Interval for monitoring and tuning. Default is 10s.
+# interval=10
+
+#
+# Disk monitoring section
+#
+[DiskMonitor]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False
+
+#
+# Disk tuning section
+#
+[DiskTuning]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False
+hdparm=False
+alpm=False
+
+#
+# Net monitoring section
+#
+[NetMonitor]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False
+
+#
+# Net tuning section
+#
+[NetTuning]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False
+
+#
+# CPU monitoring section
+#
+[CPUMonitor]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False
+
+#
+# CPU tuning section
+#
+[CPUTuning]
+# Enabled or disable the plugin. Default is True. Any other value
+# disables it.
+enabled=False